Display of the setpoint (temperature
setting) in the storage program
P
Press the
button, and hold it in.
The display then shows the "desired value" and
thereby the temperature setting.
SF 550: -18ºC
KP 60/82: +4ºC
Setting of the setpoint (temperature
setting) in the storage program
P
Press the
button, and hold it in. The display
then shows the "desired value" and thereby the
temperature setting. When the + or
lightly pressed (the
P
in), the value is increased or lowered.
P
When the
button is released, an auditory signal
is issued and the value is saved. The display once
again will show the internal temperature within the
unit.
765041976
-
button is
button continues to be held
Rev. 000
15