Disassembling Printer Mechanism - Epson Stylus C67 Service Manual

EPSON Stylus C67/C68/D68

4.3.3 Disassembling Printer Mechanism

4.3.3.1 Printer Mechanism
When handling the Printer Mechanism, do not hold the Front
C A U T I O N
Frame with your hands.
Follow the following steps to bring out the Printer Mechanism.
1) Remove the Stacker Assy.. (p44)
2) Remove the Main Board. (p52)
3) Remove the Panel Board. (p54)
4) Remove the PS Board. (p55)
5) Remove the Housing, Lower Assy.. (p47)
DISASSEMBLY/ASSEMBLY
4.3.3.2 Holder Shaft Unit
1) Remove the Panel Board. (p54)
2) Remove the Clump Core from the Main Unit.
(See 4.3.2.1 Removing Main Board Step 2)
3) Press down the CR Lock Lever toward the direction of the arrow, and move
the CR unit to the other side of the home position.
Disassembly Procedures
CR Lock Lever
CR Unit
Figure 4-32. Moving CR Unit
Revision A
56