Epson Stylus C67 Service Manual page 53

EPSON Stylus C67/C68/D68
4) Remove the four screws that secure the Main Board Unit to the Main Unit,
and remove the Main Board Unit.
• C.B.S. 3 x 14: 2
• C.B.S. 3 x 6: 2
4
C.B.S. 3 x 6
Figure 4-24. Removing Main Board (2)
DISASSEMBLY/ASSEMBLY
Main Board Unit
1
C.B.S. 3 x 14
3
2
Disassembly Procedures
5) Remove the Main Board Cover from the Main Board Unit.
Main Board Main Board Cover
Figure 4-25. Removing Main Board (3)
When installing the Main Board Unit to the Main Unit, Secure
the screws in the order shown in
When attaching the Clump Core, pay attention not to confuse
left and right. The side with two portions should be facing to the
left.
Figure 4-26. Attaching Clump Core
Revision A
Figure 4-24.
Portions
53