Disassembly Procedures - Epson Stylus C67 Service Manual

EPSON Stylus C67/C68/D68

4.3 Disassembly Procedures

This section explains the procedures for disassembling the product.
Unless otherwise stated, reassembly should be carried out in the reverse order of the disassembly procedure.
For detailed engagement relations among main components, refer to the exploded diagrams in the Appendix.
When disassembling each unit, refer to the pages described in the chart below.
START
"Housing, Upper"
4.3.1.1 (p. 43)
"ASF Unit"
4.3.1.3 (p. 44)
"Hopper/Retard Roller
Unit"
4.3.1.4 (p. 45)
DISASSEMBLY/ASSEMBLY
"Stacker Assy."
4.3.1.2 (p. 44)
"CR Timing Belt" "Front Frame"
4.3.3.5 (p. 60) 4.3.3.7 (p. 62)
"Eject Roller"
"CR Motor"
4.3.3.15 (p. 70)
4.3.3.6 (p. 61)
"Paper Guide, Front
Assy."
4.3.3.16 (p. 72)
"Main Board" "Panel Board"
4.3.2.1 (p. 52) 4.3.2.2 (p. 54)
Figure 4-1. Disassembling Flowchart (1)
Disassembly Procedures
"CR Cable Head
"CR Encoder Scale"
Cover"
4.3.3.8 (p. 63)
4.3.3.9 (p. 64)
"PS Board"
4.3.2.3 (p. 55)
Revision A
"Paper Guide, Upper
Assy."
4.3.3.14 (p. 70)
41