Epson Stylus C67 Service Manual page 73

EPSON Stylus C67/C68/D68
When Paper guide front is removed or replaced with new one, the
A D J U S T M E N T
R E Q U I R E D
following adjustment must be performed in the order below.
1. "Top Margin Adjustment"
2.
"PF Adjustment"
3.
"Bi-D Adjustment"
4.
"Head Angular Adjustment"
5.
"First Dot Adjustment"
DISASSEMBLY/ASSEMBLY
4.3.3.17 Pump Unit/Cap Unit
When removing the Pump Unit and the Cap Unit, pay attention not
C A U T I O N
to drop the CR Lock Lever and the Gear.
1) Remove the Housing, Lower Assy.. (p47)
2) Remove the Holder Shaft Unit. (p56)
3) Release the three tabs that secure the Pump Unit to the Main Unit, and remove
both the Pump Unit and the Cap Unit.
Figure 4-70. Removing Pump Unit/Cap Unit (1)
Disassembly Procedures
Revision A
Tabs
73