Epson Stylus C67 Service Manual page 67

EPSON Stylus C67/C68/D68
4.3.3.11 Printhead Assy.
1) Remove the CR Unit. (p64)
Before starting the following work, make sure that the two tabs
C H E C K
P O I N T shown in Figure 4-53 are already released.
2) Release the tab from the notch of the IC Holder, and remove the printhead
cover.
3) Turn the Printhead Assy. toward the direction of the arrow, and remove the
Printhead Assy.
Printhead Assy.
IC Holder
Tab and Notch
Figure 4-57. Removing Printhead Assy. (1)
DISASSEMBLY/ASSEMBLY
Printhead Cover
Disassembly Procedures
4) Remove the Head FFC from the Printhead Assy.
Printhead Assy.
Figure 4-58. Removing Printhead Assy. (2)
Revision A
Head FFC
67