Locking The Device - Philips SFF 6135D User Manual

Printing Multiple Copies
Printing Multiple Copies
You can apply settings to your device whereby multiple
copies of fax transmissions are printed out upon recep-
tion.
1 Press C, 4022 and OK.
2 Enter a value from 1 to 99.
3 Confirm with OK.
Spaltenumbruch

Locking the Device

Locking the Device
With the locking function, you can prevent unauthor-
ised persons from using your device. Only after entering
of the correct code will it be possible to access func-
tions or enter numbers. The lock will turn itself on again
after each use of the device.
Entering the PIN Code
Default Access Code
Notice
Default Access Code
The function is switched off with the factory-
installed access code ( 0000 ). Change the
access code to switch on the function. If you
want to switch the function off enter the fac-
tory-installed code 0000 again.
1 Press C, 921 and OK.
Notice
Entering the PIN Code
If you have already saved a code, the device
will ask you to provide the old code first
before you can enter a new code.
2 Enter a four-digit PIN code.
3 Confirm with OK.
4 Enter the code again for confirmation purposes.
5 Confirm with OK.
Locking the Keyboard
Locking the Keyboard
This function locks the entire keyboard of the device.
1 Press C, 922 and OK.
2 Enter the four-digit PIN code.
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Locking Manual Dialling
Locking Manual Dialling
This function blocks the manual dialling of telephone num-
bers. Numbers from the telephone book can be called.
Manual dialling of emergency number is not possible.
1 Press C, 923 and OK.
2 Enter the four-digit PIN code.
3 Confirm with OK.
Settings · Locking the Device
4 Use [ to select ONLY DIRECT. .
5 Confirm with OK.
Lock USB Storage Medium
Lock USB Storage Medium
You use this function to block access to a connected
USB storage medium.
1 Press C, 925 and OK.
2 Enter the four-digit PIN code.
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Lock Settings
Lock Settings
This function blocks the changing of settings on your
device. The settings can be locked with a customizable
administrator pin code
Entering the PIN Code
Default Access Code
Notice
Default Access Code
The function is switched off with the factory-
installed access code ( 0000 ). Change the
access code to switch on the function. If you
want to switch the function off enter the fac-
tory-installed code 0000 again.
1 Press C, 0001 and OK.
Notice
Entering the PIN Code
If you have already saved a code, the device
will ask you to provide the old code first
before you can enter a new code.
2 Enter a four-digit PIN code.
3 Confirm with OK.
4 Enter the code again for confirmation purposes.
5 Confirm with OK.
Activate and deactivate functions
1 Press C, 0002 and OK.
2 Enter the four-digit PIN code.
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
EN
61