Additional Wireless Network Settings - Philips SFF 6135D User Manual

Enter Secondary DNS
1 Press C, 0845 and OK.
2 Enter the address of the secondary DNS.
3 Confirm with OK.
EN
Verify DHCP Settings
Available Function (WLAN)
Notice
Available Function
This function is only available if you have
selected automatic IP address assignment with
the function 083.
Introduction
With these functions, you can verify the assigned net-
work settings from your network's DCHP router. You
cannot modify the settings.
Displaying the IP Address
1 Press C, 0851 and OK.
2 The current IP address is displayed; it is the address
that your device is registered with on the network.
Display Subnet Mask
1 Press C, 0852 and OK.
2 The subnet mask being used is displayed.
Display IP Address of the Access Point (=
Gateway)
1 Press C, 0853 and OK.
2 The IP address of the access point (router) is dis-
played.
Display Primary DNS
1 Press C, 0854 and OK.
2 The primary DNS address is displayed
Display Secondary DNS
1 Press C, 0855 and OK.
2 The secondary DNS address is displayed
Additional Wireless
Network Settings
Enter the Primary Windows
Internet Name Service (WINS)
Server
Introduction
WINS is a network service that converts the IP address
of the connected network components into NetBIOS
names and vice-versa on the local area network (LAN).
You can enter a primary and secondary WINS server.
1 Press C, 0861 and OK.
2 Enter the address of the primary WINS server.
3 Confirm with OK.
54
Enter the Secondary Windows
Internet Name Service (WINS)
Server
1 Press C, 0862 and OK.
2 Enter the address of the secondary WINS server.
3 Confirm with OK.
Enter the First Network Name (=
NetBIOS)
Introduction
The device is registered on the network with the Net-
BIOS name.
1 Press C, 0863 and OK.
2 Enter the first NetBIOS name.
3 Confirm with OK.
Enter the Second Network Name
(= NetBIOS)
1 Press C, 0864 and OK.
2 Enter the second NetBIOS name.
3 Confirm with OK.
Philips · LaserMFD 6135hfd