Table of Contents
Advertisement
11 Fax
Send a Fax Using Standard
EN
Settings
Send a Fax Using Standard Settings
Your fax message will be sent using the standard set-
tings. If you would like to adjust the settings yourself
(for example resolution or contrast) for a fax transmis-
sion use function Send Fax Later,page 44).
1 Insert the document.
2 Press FAX.
Notice
Call Up Function Immediately
You can also call the function by pressing
C, 41 and OK.
3 Enter the desired number using the numeric keypad
or select a saved entry.
4 Press FAX or o.
Busy Number
Notice
Automatic Redial
If the subscriber is busy, the device dials the
number again after some time. Press j, in
order to cancel the transmission process.
After the transmission, the device prints out a
transmission report depending on the set-
tings.
Specifications for Documents
Specifications for Documents
Width of Documents
Length of Documents 277¦–¦600¦mm
Paper Weight of the
Documents
Capacity
Manufacturer's Rec-
ommendation for Op-
timum Operation
42
208¦–¦218¦mm
60¦-¦90¦g/m2
50 page (80¦g/m2)
A4 · A5 · Letter · Legal
(80¦g/m2
Unsuitable Documents!
CAUTION!
Unsuitable Documents!
Do not insert any documents into the device
that ...
... are wet, have been edited with correction
fluid, are soiled or have a coated surface.
... that are written on with a soft pencil, with
paint, chalk or charcoal.
... originate from newspapers or magazines
(printing ink).
... that are held together with office or note-
book staples or with tape or glue.
... are pasted with note papers.
... are creased, crumpled or torn.
Loading Documents
1 Open the scanner cover.
2 Lay the document onto the scanner glass with the
written side down.
Philips · LaserMFD 6135hfd
Advertisement
Table of Contents
