Sony PVM-X300 Operating Instructions Manual page 16

Submenu
LED BRIGHTNESS
FOCUS ASSIST SETTING
USER CONFIG-FOCUS ASSIST SETTING
FOCUS ASSIST:
FOCUS MODE:
COLOR:
FREQUENCY:
RANGE:
GAIN:
Submenu Setting
FOCUS ASSIST Enables or disables the focus assist
function that can highlight focused
objects with contrasting color.
• OFF: to disable the focus assist
• ON: to enable the focus assist function
FOCUS MODE Switches the focus mode.
• STD: An image with sharpened edges
• COLOR: Displays the intensified
COLOR Selects the color to intensify from
among WHITE, RED, GREEN, BLUE,
and YELLOW.
FREQUENCY Sets the center frequency of the edge
sharpening signal.
You can select LOW, MIDDLE,
MIDDLE HIGH, or HIGH.
RANGE Sets the target area for edge sharpening.
You can select NARROW, MIDDLE, or
WIDE.
GAIN Sets the level of edge sharpening.
You can select from 0 to 100.
16
Adjustment Using the Menus
Setting
Selects the brightness of the LED of
the buttons.
• HIGH: The LED becomes
brighter.
• LOW: The LED becomes darker.
xx
xxxxx
xxx
xxxxxxx
xxxx
xx
function
is displayed.
areas of images with color
selected in COLOR below.
Scan mode image
4K/QFHD
mode
(native)
2K/HD mode
(native)
4096 × 2160
3840 × 2160
1920 × 1080