User Control Menu; User Config Menu - Sony PVM-X300 Operating Instructions Manual

Submenu
COLOR TEMP
MANUAL
ADJUSTMENT
COLOR SPACE
GAMMA

USER CONTROL menu

The USER CONTROL menu is used for adjusting the
picture.
USER CONTROL
APERTURE:
14
Adjustment Using the Menus
Setting
Selects the color temperature from
among D65, D93 and USER
setting.
Note
If you measure the color
temperatures of different display
types, such as CRT, LCD, or
OLED, by using a common (or
general) color analyzer that is based
on CIE 1931, and adjust the xy
chromaticity to the same value, the
appearance may be different
because of optical spectrum
differences.
To compensate for this difference,
the D65 and D93 settings of the
monitor are adjusted by an offset*.
* The offset value applied (x-0.003,
y-0.005) is based on the Judd's
function to the CIE 1931 (x, y)
value.
If you set the COLOR TEMP to
USER setting, the item displayed is
changed from black to white, which
means you can adjust the color
temperature.
The set values are memorized.
• ADJUST GAIN: Adjusts the
color balance (Gain).
• ADJUST BIAS: Adjusts the
color balance (Bias).
• COPY FROM: If you select D65
or D93, the white balance
data for the selected color
temperature will be copied
in the USER setting.
Selects the color space from among
ITU-709 and S-GAMUT.
Select the appropriate gamma mode
from among 2.2, 2.4, 2.6 and
S-LOG2 TO 709(800%).
The factory setting is gamma 2.4
that is specified by ITU-R BT.1886.
x
Submenu Setting
APERTURE Adjusts the picture sharpness.
The higher the setting, the sharper
the picture. The lower the setting,
the softer the picture. APERTURE
does not work when the FOCUS
ASSIST is set to ON.

USER CONFIG menu

The USER CONFIG menu is used for making the input,
system, and focus assist settings.
There are two input settings:
• 4K/QFHD INPUT SETTING: to display 4K or QFHD
images
• 2K/HD INPUT SETTING: to display 2K or HD
images
USER CONFIG
4K/QFHD INPUT SETTING:
2K/HD INPUT SETTING:
SYSTEM SETTING:
FOCUS ASSIST SETTING:
4K/QFHD INPUT SETTING
This is the input setting for 4096 × 2160 and 3840 ×
2160 signals. The setting items differ depending on the
selection made with the input select button (SDI or
HDMI) on the front panel.
When SDI input is selected
USER CONFIG-4K/QFHD INPUT SETTING
xxxxxxxxx
INTERFACE FORMAT:
xxxxxxxx
SIGNAL FORMAT:
xxxxxxx
INPUT:
When HDMI input is selected
USER CONFIG-4K/QFHD INPUT SETTING
xxxxxxxxx
INTERFACE FORMAT:
x
SIGNAL FORMAT:
xxxx
INPUT: