Rear Panel/Side Panel/Lower Panel - Sony PVM-X300 Operating Instructions Manual

Professional video monitor
Hide thumbs Also See for PVM-X300:
Table of Contents

Advertisement

Rear Panel/Side Panel/Lower Panel

148qa SDI IN (SDI input) connectors (BNC)
Input connectors for serial digital signals.
The 1 to 4 connectors are available for four inputs.
To input the Quad-Link 3G-SDI signal, connect the
Link 1 signal to SDI IN1, the Link 2 signal to SDI
IN2, the Link 3 signal to SDI IN3, and the Link 4
signal to SDI IN4,
To input the Quad-Link HD-SDI signal, connect the CH
1(Link A) signal to SDI IN1, the CH 2(Link B) signal
to SDI IN2, the CH 3(Link A) signal to SDI IN3, and
the CH 4(Link B) signal to SDI IN4,
259qs MONITOR OUT (monitor input)
connectors (BNC)
Output connectors for serial digital signals.
Each of 1 to 4 connectors outputs the signal that is
input to the corresponding SDI IN connector.
Notes
• The signal from the MONITOR OUT connector does
not satisfy the ON-LINE signal specifications.
• Output is only activated when the power is on. No
output in standby mode.
360qd HDMI input connectors
Input connectors for HDMI signals.
The 1 to 4 connectors are available for four inputs.
HDMI (High-Definition Multimedia Interface) is an
interface that supports both video and audio on a single
10
Location and Function of Parts and Controls
qg
qh
LAN
PEER TO PEER
NETWORK
LAN
AUDIO
5V
0.5A
(10/100)
OUT
qj
qk
ql
digital connection, allowing you to enjoy high quality
digital picture and sound. The HDMI specification
supports HDCP (High-bandwidth Digital Content
Protection), a copy protection technology that
incorporates coding technology for digital video signals.
Note
Use HDMI compliant cable (optional), Category 2
(High Speed HDMI Cable), with HDMI logo.
7qf PC input connectors (12)
Used for future expansion.
o AC IN Socket
Connects the supplied AC power cord.
p OPTION connector
Used for future expansion.
q LAN (10/100) connector
Used for future expansion.
Connect to the LAN (10/100) connector of the network
by using a 10BASE-T/100BASE-TX LAN cable.
CAUTION
For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port.
r NETWORK switch
Used for future expansion.
1
SDI IN
1
2
MONITOR
OUT
3
1
4
SDI IN
2
5
MONITOR
OUT
6
2
7
1
8
SDI IN
3
9
MONITOR
OUT
0
3
qa
SDI IN
4
qs
MONITOR
OUT
qd
4
qf
2

Advertisement

Table of Contents
loading

Table of Contents