Input Signals And Adjustable/Setting Items - Sony PVM-X300 Operating Instructions Manual

VOLUME
Press the F6 button to display the adjustment screen
and adjust the volume. Press again to hide the
adjustment screen. However, the volume remains
adjustable. Turn the menu selection control right to
increase the volume and turn left to decrease it.
VIEW MODE
Press the F7 button to select the view mode. Each time
the button is pressed, 4K/QFHD mode or 2K/HD
mode is set alternately.
e Menu operation buttons
Displays or sets the on-screen menu.
Menu selection control
When the menu is displayed, turn the control to select
a menu item or setting value, and then press the
control to confirm the setting.
If the menu is not displayed and the menu selection
control is pressed, the characters that represent the
names of the buttons light up. Also, the names of the
functions assigned to the function buttons appear on
the screen.
Alternatively, if the menu is not displayed and the
menu selection control is pressed for more than two
seconds, the signal format is displayed on the screen.
BACK button
When the menu is displayed, press the button to reset
the value of an item to the previous value (except
some items).
When the menu is not displayed, press the button to
display the names of the functions assigned to the
function buttons.
MENU button
Press to display the on-screen menu.
Press again to clear the menu.
f 1 (standby) switch and indicator
Press to turn the power on when this unit is in standby
mode. After being turned on, the unit performs
initialization and the indicator flashes in green. The
indicator lights in green once initialization is completed.
Press the switch again to set the monitor in standby
mode. The indicator goes out.
Note
The indicator temporarily lights in green even in standby
mode, immediately after the AC power cord is
connected to an AC outlet.
Error display by the indicator
The indicator of the 1 (standby) switch on the front
panel may show an error while the monitor is being
operated. If the error is shown, please contact an
authorized Sony dealer.
Error display Symptoms
Flashes in red Device error
Lights in amber The temperature in the panel part is
unusual.
Flashes in amber The ambient temperature sensor is
unusual.
Flashes in green and Fan error
amber
Input Signals and Adjustable/
Setting Items
Item
*1
BRIGHTNESS
*1
CONTRAST
CHROMA
BACKLIGHT
FOCUS ASSIST
VOLUME
VIEW MODE
COLOR TEMP
COLOR SPACE
GAMMA
APERTURE
×
a : Adjustable/can be set : Not adjustable/cannot be set
*1 This item is disabled when GAMMA is set to S-LOG2 TO
709(800%) in the COLOR TEMP/COLOR SPACE/GAMMA
menu.
Location and Function of Parts and Controls
Input signal
SDI HDMI
a a
a a
a a
a a
a a
a a
a ×
a a
a a
a a
a a
9