Troubleshooting; Specifications - Sony PVM-X300 Operating Instructions Manual

Troubleshooting

This section may help you isolate the cause of a problem
and as a result, eliminate the need to contact technical
support.
• The unit cannot be operated t A function that does
not work is assigned. Press the BACK button to check
the function assigned to the function button.
• The black bars appear at the upper/lower/left/right
positions, or left/right positions of the display t
When the signal aspect ratio is different from that of
the panel, the black bars appear. This is not a failure of
the unit.
• Adjustments and settings cannot be made t
Adjustments and settings may not be possible
depending on the input signals and the status of the
unit. See "Input Signals and Adjustable/Setting Items"
(page 9).
• Color is not displayed correctly t Check the
INTERFACE FORMAT, SIGNAL FORMAT,
COLOR TEMP or COLOR SPACE setting.

Specifications

Picture performance
LCD panel a-Si TFT Active Matrix
Picture size (diagonal)
767.5 mm (30.2 inches)
Effective picture size (H × V)
678.9 x 358.0 mm
3
(26 / × 14
4
Resolution (H × V)
4096 × 2160 pixels
Aspect 17:9
Pixel efficiency 99.99%
Panel drive RGB 10-bit
Viewing angle (Panel specification)
89º/89º/89º/89º (typical)
(up/down/left/right, contrast > 10:1)
Color temperature
D65, D93
Warm-up time Approx. 30 minutes
To provide stable picture quality, turn
on the power of the monitor and
leave it in this state for more than 30
minutes.
Input
SDI input connector
BNC type (4)
HDMI input connector
HDMI (4)
HDCP correspondence
Output
SDI monitor output connector
BNC type (4)
Output signal amplitude: 800 mVp-p
±10%
Output impedance: 75 Ω unbalanced
Audio monitor output connector
Stereo mini jack (1)
Built-in speaker output
1.0 W Stereo
Headphones output connector
Stereo mini jack (1)
General
Power AC 100 to 240 V, 2.4 A to 1.2 A, 50/
60 Hz
Power consumption
Approx. 220 W (max.)
1
/ inches)
8
Troubleshooting / Specifications
17