Specification; Printer Specification - Dascom 5130P User Manual

Tally Dascom 5130P

7 Specification

7.1 Printer specification

Print System Mono-chrome serial impact dot matrix
Print
Uni-/bi-directional logic seeking for text and graphics (software selectable)
Technology
10 CPI
12 CPI
15 CPI
16.6 CPI
Print Speed
17.1 CPI
20 CPI
24 CPI
(*Available for max. 8.4inches
0.5inch width must be left for both sides of the paper loader.)
10 CPI
12 CPI
15 CPI
16.6 CPI
17.1 CPI
Font Matrix
20 CPI*
24 CPI*
Proportional
(* Not available for Olivetti emulation.)
H. 1/60, 1/72, 1/80, 1/90, 1/120, 1/180,1/216, 1/360
Graphics
V. 1/180, 1/360
Number of pins:
Firing frequency:
Print Head
Diameter of pin:
Life:
Friction feed:
Paper Feed
Continuous feed (optional): 5ips (inches per second)
Speed
Line feed:
Friction:
10 CPI:
12 CPI:
Printable 15 CPI:
Columns 16.6 CPI:
17.1 CPI:
20 CPI:
24 CPI:
Pitch HS Draft
(1)
400 CPS*
360 CPS
450 CPS
250 CPS
513 CPS
600 CPS
360 CPS
Pitch HS Draft
8x8/80H
10x24/120H
8x16/120H
12x24/240H
7x24/120H
6x24/120H
10x24/240H
Nx24/360H
(5)
94 CPL
112 CPL
141 CPL
156 CPL
161 CPL
188 CPL
225 CPL
Draft
(2)
300 CPS 100 CPS
360 CPS 120 CPS
450 CPS 150 CPS
250 CPS 167 CPS
513 CPS 171 CPS
600 CPS 200 CPS
360 CPS 360 CPS
(3)
width media, single ply and bankbook only. At least
Draft
12x24/120H 36x24/360H
10x24/120H 30x24/360H
8x16/120H 24x16/360H
12x24/240H 36x24/360H
7x24/120H 36x24/360H
6x24/120H 30x24/360H
10x24/240H 10x24/240H
Nx24/360H Nx24/360H
24 pins/ 12x2 column
Normal mode: 1800 Hz
0.25 mm
400 million strokes/pin
15ips (inches per second)
40ms/line (at 6lpi)
Tractor: (optional)
10 CPI:
12 CPI:
15 CPI:
16.6 CPI:
17.1 CPI:
20 CPI:
24 CPI:
49
LQ
LQ
(4)
(Matrix/DPI )
82 CPL
98 CPL
123 CPL
136 CPL
140 CPL
164 CPL
196 CPL