Page Setup - Dascom 5130P User Manual

Tally Dascom 5130P

4.6.3 Page Setup

Parameter Parameter
group
Page Line
(1)
Setup Space
Form
(1)
Length
Top Margin
(0~60/60")
Bottom
Margin
(0~30/60")
Line Width
Left Margin
(0~90/90")
Reference
Edge
Possible Description
settings
1/6" * Sets the line density in lines per inch.
1/3" 1/6=6 lines per inch
1/4" 1/3=3 lines per inch
1/5" 1/4=4 lines per inch
1/7" 1/5=5 lines per inch
1/8" 1/7=7 lines per inch
1/8=8 lines per inch
3" Sets the form length either via inches or the standard format A4.
3.5" Please note that the adjustment in lines depends on the selected
11/3" line space (see above).
4"
4.5"
5"
5.5"
6"
7"
8"
8.5"
11" *
A4
12"
14"
17"
0" Sets the position of the first printing line. The factory setting for
l the first printing position is 10/60"(4.23mm). This is equivalent to
10/60" * the second line from the top.
l
60/60"
0" Sets the distance between last printing line and bottom edge.
l
(1)
10/60" *
l
30/60"
80 Sets the line length; unit is number of characters at a character
90 density of 10 cpi.
94 * If 80 is chosen in Olivetti emulation, 90 is used for the line length
instead of 80.
Note: This parameter is invalid for continuous forms (optional
tractor feed handling), with default setting "80" .
0" * Sets the left margin; unit is n/90 inch.
l
90/90"
Left * Sets the horizontal leading edge.
Right Left: the left edge of the character matrix is aligned to the left
35