Copy Menu; Menu Change Mode; How To Change Current Configurations - Dascom 5130P User Manual

Tally Dascom 5130P
4.4

Copy Menu

1) With the cover closed, hold 【USER1】 + 【USER2】 while powering on until the printer resets and beeps
3 times. LED"DATA" lights up and LED"ON/PAPER" blinks to indicate the activation of Setup Menu
mode.
2) Load an A4 paper. The printer will automatically print as below.
【USER1】prints the listing 【USER2】skips the listing
3) Press【USER2】 to skip listing current settings. The printer will print as below:
Current Setting:
【USER1】=OK 【USER2】=Next 【OFFLINE】=Exit
4) Press 【USER1】 to enter "Common Setup" . Press 【USER2】 3 times to print out "Copy Menu".
Press 【USER1】 to copy Menu 1 to Menu2 or copy Menu 2 to Menu1.
4.5

Menu Change Mode

1) With the cover closed, hold 【USER1】 + 【USER2】 while powering on until the printer resets and beeps
3 times. LED"DATA" lights up and LED"ON/PAPER" blinks to indicate the activation of Setup Menu
mode.
2) Load an A4 paper. The printer will automatically print as below.
【USER1】prints the listing 【USER2】skips the listing
3) Press【USER2】 to skip listing current settings. The printer will print as below:
Current Setting:
【USER1】=OK 【USER2】=Next 【OFFLINE】=Exit
4) Press 【USER1】 to enter "Common Setup". Press 【USER2】 4 times to print out "Share User".
Press 【USER1】 to select "Auto" or "Manual".
4.6

How to Change Current Configurations

1) With the cover closed, hold 【USER1】 + 【USER2】 while powering on until the printer resets and beeps
3 times. LED"DATA" lights up and LED"ON/PAPER" blinks to indicate the activation of Setup Menu
mode.
2) Load an A4 paper. The printer will automatically print as below.
【USER1】prints the listing 【USER2】skips the listing
3) Press【USER2】 to skip listing current settings. The printer will print as below:
Current Setting:
【USER1】=OK 【USER2】=Next 【OFFLINE】=Exit
4) Press 【USER1】 to enter "Common Setup". Press 【USER2】 to print out "Change Menu".
Press 【USER1】 to select "Menu1" or "Menu 2".
Common Setup
Common Setup
Common Setup
32