Configuring Primary-Standby Mode; Figure 6-20 Primary-Standby Configuration Page - Tadiran Telecom TGW4 SERIES User Configuration Manual

TGW4/8 Gateway Series for Aeonix

6.2 Configuring Primary-Standby Mode

To configure the Primary-Standby mode:
Click the Basic > SIP tab.
Step1
Primary-Standby configuration page
Figure 6-20
For detailed information, see 2.3.6 High Availability Configuration on page 21.
Step2 From the High availability - Mode drop-down list, select Primary-Standby.
Step3 In the Registrar server field, enter the primary Aeonix server IP address or name.
Step4 Enter the backup Aeonix server IP address in the High availability - Backup SIP proxy field.
Note：This step is required if an IP address is filled in Step2 .
When a domain name is filled in Step2 , you can also fill in a backup IP address. This allows the
device to failover to the backup IP address if the domain name resolution service fails.
Step5 Select Primary server heartbeat detection.
Step6 Configure the OPTIONS request period.
Step7 Click Save.
Step8 Click the Basic > Network tab.
Tadiran Telecom (TTL) L.P.
High Availability Configuration Guide
117