Divus TZ07-B?TZ07-W Technical Manual page 31

TZ07-B, TZ07-W
The following pages show how to correctly configure the Videophone app.
In order to use at least the minimal functionality of the app, the settings regarding the VoIP registration (the
first 5 settings) have to be configured correctly. In the connection it will already be possible to reach other
members of the VoIP server / to receive calls from other members.
The 5 settings in detail:
Setting
Enter VoIP server IP
Enter VoIP username
Enter VoIP password
Enter VoIP port
Enable re-registration
Note: the app DIVUS VIDEOPHONE was designed for the use in combination with DIVUS systems.
Since the app is based completely on the SIP standard, it will also be possible to use it with
arbitrary VoIP servers. Nevertheless, DIVUS points out that the support for the app will only be
granted when the Videophone app is used in combination with a system either from DIVUS or at
least defined as compatible by DIVUS.
As already mentioned, those 5 settings are enough to register on the VoIP server and therefore to make calls
between DIVUS TZ and other VoIP members. If also external units should be handled and the video signals of
cameras should be displayed, also the following settings have to be configured correctly.
Description
In this field the IP address of the targeted VoIP server must be entered.
The username that has to be inserted in this field previously needs to be created
on VoIP server side. If a system delivered by DIVUS is used, generally the users
from 101 to 120 are already preconfigured and one of them can be used for this
field (take care when assigning the usernames; each username can be used by
only one device at the same time). If a KNXSERVER is used as VoIP server, you will
have to create an internal unit for DIVUS TZ in the corresponding configuration
menu on the server. More information regarding this topic can be found in the
manual of the server.
The VoIP password, when using a system preconfigured and delivered by DIVUS,
is always identical to the username. If you are using your own configuration,
please insert the password that you have set during the creation of the
corresponding user on the VoIP server.
Defines the VoIP port, through which the VoIP server accepts registrations
(normally ALWAYS „5060", please change only in special cases).
If this option is enabled, an additional field named „Registration timeout" will be
shown, which allows the input of a time period in minutes. After this timeout the
registration on the VoIP server will be force-closed and renewed. TAKE CARE: this
option is not required in combination with VoIP servers delivered by DIVUS and
is therefore disabled by default. Only when using certain third party systems
(please check out also the note below) this setting can be required in order to
get correct functionality, like e.g. in combination with AVM FRITZ!Box.
E-29