Divus TZ07-B?TZ07-W Technical Manual page 27

TZ07-B, TZ07-W
This manual will neither describe the contents of the server or its navigation, nor will it enter in detail on the
server features themselves. All information regarding DIVUS KNXSERVER can be found in the corresponding
user and installation manuals.
The following pages will exclusively handle the configuration of the web app itself. A click on the „Settings"
button opens the configuration page of the app. If the settings page is protected by password, also here – as
already described for the DIVUS LAUNCHER – the correct password must be inserted. The following
screenshots show as well the password dialog as also the settings page:
The following list explains the single parameters that can be configured:
Setting
IP Address
SSL Protection
Port
Description
In this field the IP address of the targeted KNXSERVER must be entered. Take
care, the web app supports only KNXSERVER of the last generation (hardware
with DIN rail mounting).
This checkbox enables / disables the SSL protection of the server connection.
Generally in local networks there is no need for SSL protection. Therefore this
option is disabled as default.
Depending on the previous setting, the default port is either 443 (SSL enabled) or
80 (SSL disabled). If the connected server has a special network configuration
(e.g. uses port forwarding) and is reachable only through another port, the
corresponding port can be set here. If you are using a standard version of the
server you can just use the default values already set for this field.
E-25