Divus TZ07-B?TZ07-W Technical Manual page 24

TZ07-B, TZ07-W
While the right screenshot on the last page shows an example of a lock screen with active template function,
the left screenshot shows the available options:
- Lock Screen Timeout:
Defines the time, after which the lock screen should be shown. Please take care that the first access
to the lock screen after changing the template settings always will be take around 40 seconds; the
defined value will then be used for any further start of the lock screen.
- Lock Screen IP Address:
Defines the IP address of the KNXSERVER, which provides the lock screen template
- Lock Screen ID:
Defines the ID number of the room that is used as lock screen template. This number can be
identified through the search function within the configuration area of KNXSERVER. Just search for
the desired room; in the list with the search results the ID number is shown right under the name of
the room, as shown in the following screenshot:
- Lock Screen Buttons:
Through this pop-up menu you can define how many buttons the used lock screen template should
show. You can select between 1, 2, 4, 6 or 8 buttons. Please take care that the previously (through
the ID number) selected room contains at least the selected amount of KNX objects, otherwise the
lock screen template will show empty buttons.
- Lock Screen Username:
Please specify the user name required for the login on KNXSERVER. NOTE: for a better overview it is
recommended to create a separate user in KNXSERVER for the lock screen template.
- Lock Screen Password:
Please insert the password corresponding to the user inserted before
If all parameters have been configured correctly, at the next launch of the lock screen the desired buttons
should be shown and a direct control of the system should be possible. Naturally, the previously explained
lock screen gestures will remain active also when using the template option.
Note:
Depending on the server configuration it can be possible that the login credentials at the first
access have also to be inserted manually. Furthermore, in front of graphical changes to the
visualisation (like e.g. a THEME switch) it will be necessary to reboot DIVUS TZ through the power
off menu in order to take over all the changes.
E-22