C1 Hardware Interfaces - Divus TZ07-B?TZ07-W Technical Manual

TZ07-B, TZ07-W
- For both external and internal units it is possible to define QuickDial buttons which are shown in the
dial window of the app
- The SIP port (default 5060) can now be changed
- It is possible to enable a forced re-registration after a definable time period (is required by some
VoIP servers)
- Extension of the layout support for additional resolutions / Android devices
- Smaller graphical adaption (like introduction of images during incoming / outgoing calls)
- Introduction of a version page
Please check that your DIVUS TZ has loaded the latest software versions. An update of your DIVUS TZ to the
latest operating system version can be requested using the following form:
http://www.divus.eu/index.php?option=com_chronocontact&Itemid=333&lang=en
The single apps instead can also be updated directly through the Google Play Store. If your account is
correctly registered, you should automatically get a notification when new versions are available.

C1 Hardware interfaces:

As already seen in chapter A2, DIVUS TZ offers different kinds of interfaces as well on the rear as on the front
side. All interfaces are integrated and functional on Android level and can be accessed from custom
applications through corresponding libraries. The following list shows the interfaces currently used by the
applications of DIVUS, as well as the interfaces currently free and therefore usable in custom apps. In case
you should need the function libraries for your own customizations, please refer to the technical support of
DIVUS:
Front side:
- Temperature sensor
- Brightness sensor
- Microphone
- USB-OTG
- microSD card slot
- RGB-LED
- IR sensor
- Speaker
Rear side:
- RS232/RS485
- DIO
- USB1+2
- Line Out
Note: USB support
Generally all USB devices compatible with Linux operating systems that are using the default
drivers (HID devices, mass storages) can be used in combination with DIVUS TZ.
Free, values can be accessed through library
Is used by the DIVUS LAUNCHER for automatic brightness control
Among others used by the DIVUS VIDEOPHONE app
Works as well as USB host as also as USB device, which means that either
USB devices (like USB storages, USB mice etc.) can be connected or
DIVUS TZ can be used as mass storage on a PC.
(check out http://www.usb.org/developers/onthego/
Through the settings of DIVUS LAUNCHER connected microSD cards
can be mounted / unmounted
Is used by the DIVUS LAUNCHER for signaling purposes
Free, can be controlled through library
Among others used by the DIVUS VIDEOPHONE App
Free, can be controlled through library
Free, can be controlled through library
For the connection of USB devices (like USB storages, USB mice etc.)
Can be used to forward the audio signal to a HiFi system (internal audio
signal is disabled)
E-13
)