Page 1
DIVUS TOUCHZONE . Technical Manual DIVUS TOUCHZONE TZ07-TZ10-15”-TZ19 Version DTZ2.15-3.2 06/17...
Page 2
DIVUS VIDEOPHONE (1.0) v. 1.0.1 rev. 65 DIVUS VIDEOPHONE 4 v. 4.1.0 rev. 89 DIVUS OPTIMA v. 1.1.1 rev. 82 DIVUS KIBRO v. 1.2.1 rev. 16 DIVUS MÜLLPLANER v. 1.0 rev. 9 DIVUS IP CAM VIEWER v. 1.0 rev. 10 DIVUS SCREENCLEANER v. 1.0.1 rev. 9...
Page 3
DIVUS TOUCHZONE . Through most of the manual the Android version 4.2.2 is used in screenshots and examples. Android version 5.0.2 will be discussed in a separate chapter.
Page 4
DIVUS TOUCHZONE . CONVENTIONS [KEYS] Keys that are to be pressed by the user are given in square brackets, e.g. [CTRL] or [DEL] COURIER On-screen messages are given in the Courier font, e.g. C:\> COURIER BOLD Keyboard input to be made by the user are given in Courier bold, e.g. C:\>DIR).
Page 5
DIVUS TOUCHZONE . SAFETY INSTRUCTIONS The present operating instructions contain those safety instructions that are required to safely operate the ma- chine. All persons working with the machine must heed the present operating instructions, especially the safety in- structions. In addition, all local stipulations governing the prevention of accidents must be heeded.
Page 6
DIVUS TOUCHZONE . STANDARDS The DIVUS TOUCHZONE meets the following guidelines and standards: Low Voltage Directive 2014/35/EU (ex 73/23/CEE 93/68/CEE 06/95/CE) Standard to which conformity is declared: EN 50491-3:2009, EN 60950-1:2006+A11:2009+A1:2010+A12:2011 Safety EMC Directive 2014/30/EU (ex 89/336/CEE 92/31/CEE 93/68/CEE 04/108/CE)
FRONT CONNECTIONS _________________________________________________________________ 13 PRODUCT CONTENTS _______________________________________________________________________ 14 COMMISSIONING ______________________________________________________________________________ 15 GROUNDING _______________________________________________________________________________ 15 COMMISSIONING ___________________________________________________________________________ 15 INSTALLING THE DIVUS TOUCHZONE _________________________________________________________ 16 OPERATING SYSTEM ___________________________________________________________________________ 17 FEATURES _________________________________________________________________________________ 19 HARDWARE INTERFACES ____________________________________________________________________ 20 GOOGLE PLAY STORE _______________________________________________________________________ 20 DIVUS LAUNCHER __________________________________________________________________________ 21 3.4.1...
Page 8
FUTURE UPDATES OF ANDROID 5.0.2 ________________________________________________________ 69 TECHNICAL DATA _____________________________________________________________________________ 70 MECHANICAL DATA ________________________________________________________________________ 70 DIVUS TOUCHZONE DATA OVERVIEW ________________________________________________________ 71 DIVUS TOUCHZONE WALL MOUNT BOX ______________________________________________________ 72 MAINTENANCE AND UPKEEP ________________________________________________________________ 77 APPENDIX ____________________________________________________________________________________ 78 RECYCLING INFORMATION __________________________________________________________________ 78...
DIVUS TOUCHZONE . INTERFACES DIVUS TOUCHZONE 1.2.1 REAR CONNECTIONS: The DIVUS TOUCHZONE has various connection possibilities on its back side. All necessary interfaces can be found there. Rear Connections: DIO (digital inputs/outputs) DC in USB1 USB2 LINE Out PoE+ ATTENTION! Only the TZ07, TZ10 and TZ15 versions support PoE+. The TZ19 version must be powered through the DC in port.
DIVUS TOUCHZONE . The digital ouputs are driven by low 3,3V voltage with 1,75mA current. To be able to use the digital output to switch any kind of load a relay-module with transistor pre-amplifier is required; an example schematic of a connected transistor pre-amplified relay-module is shown below.
7. Loudspeaker 4. POWER button NOTE: with applied design cover, only the touchscreen and the HOME button are available while operating the device. Moreover you can use the soft keys, which are shown in the navigation bar of DIVUS TZ.
DIVUS TOUCHZONE . PRODUCT CONTENTS Hardware: DIVUS TOUCHZONE Fixing set to be used with a wall mount kit Retention screws Aluminum front cover Software: Pre-Installed, fully functional operating system Documentation: Technical manual Quick Start Guide Warranty conditions Version overview...
NOTE: DIVUS offers a warranty of 24 months after shipment (valid from the date of delivery) if not stated otherwise for the DIVUS TOUCHZONE. The warranty is only valid if all transportation takes place with the original package of...
Any damage occurring to the product if incorrectly packed will be charged to the client. Furthermore in such a case DIVUS will charge an additional fee for packing. document has to be compiled and returned with the product to allow us to guarantee an efficient service and a two week repair time.
DIVUS TOUCHZONE . Operating System DIVUS TOUCHZONE is delivered with the Android operating system in version 4.2.2. This operating system, used on countless smartphones and tablets, offers nearly ungated capabilities and possibilities through its Open Source core and all the manufacturer-specific applications. General information about the Android operating system can be found under www.android.com.
Page 18
The VOLUME UP key increases the volume of the DIVUS TZ and like the VOLUME DOWN key shows the current volume through a corresponding slider element, which also permits to access further volume settings.
Pre-installed DIVUS SCREENSCLEANER app, used during screen cleaning In order to get the new features, please check that your DIVUS TZ has loaded the latest software version. An update of your DIVUS TZ to the latest operating system version can be requested using the following form: http://www.divus.eu/index.php/en/softwareupdate-divus-touchzone...
DIVUS TOUCHZONE . HARDWARE INTERFACES DIVUS TZ offers different kinds of interfaces as well on the rear as on the front side. All interfaces are integrated and functional on Android level and can be accessed from custom applications through corresponding libraries.
Play Store is either automatically hidden or shows a corresponding warning message. In order to be able to use the Play Store, you have to check that your DIVUS TZ shows the correct date and time settings. If these settings are not correct, the Play Store cannot connect to its servers and will show no contents.
Page 22
DIVUS TOUCHZONE . After the first start of DIVUS TZ, the DIVUS LAUNCHER will present the following start screen: The welcome message, as indicated also within the message itself, will be shown as long as the default system see the first page of the launcher, which on 5 of the 6 available fields will already show preconfigured icons for Building, Intercom, Multiroom, Energy and Security.
Page 23
URL in the corresponding launcher button. By default the favicon provided by the website itself is used, alternatively a predefined icon provided by DIVUS (e.g. Alarm) can be chosen. Similarly, with the text field you can also change the label which is displayed: if left empty, the default title of the linked URL is used, else the text inserted by the user is displayed.
Page 24
DIVUS TOUCHZONE . The configuration page shows the following contents: The available settings are structured in 4 categories, which will be explained in the following chapters of this manual. Furthermore, this page shows the Android version currently installed on the device. By clicking on the...
Page 25
The following screenshot shows the different settings / entries available in the first category: The first two entries simply redirect to standard Android settings and allow to change the language of the DIVUS TZ and to set the date and time correctly: DIVUS TZ offers all the languages contained in the Android repertoire.
Page 26
The next entry deals with the network settings of DIVUS TZ: DIVUS TZ supports the use of a static IP address as well as the usage of DHCP. Depending on your network, these parameters must be configured correctly in order to connect the DIVUS TZ with your network and also with the internet (check out the screenshot to the right, which shows the configuration menu for the LAN port).
Page 27
DIVUS TOUCHZONE . The next 2 settings refer to the control of the RGB-LED of DIVUS TZ. The first option permits to use the blue LED as orientation LED. When the checkbox is enabled, the LED will be continuously on and can be seen as operating LED or as orientation LED by night.
Page 28
DIVUS TOUCHZONE . 3.4.3 SETTINGS The following screenshot shows the different settings / entries available in the second category, which permit to adapt the design and the graphical representation of the launcher app: 6 parameters: Dark Design Portrait Dark Design...
Page 29
DIVUS TOUCHZONE . The following screen DIVUS LAUNCHER, which opens a range of new possibilities and was completely redesigned in the latest version. If this option is enabled, the default grid view is reduced and will occupy only around 1/3 of the screen; the remaining area can be filled with so called widgets (find some information here: http://en.wikipedia.org/wiki/Software_widget).
Page 30
DIVUS TOUCHZONE . apps, in the very same way you can now swipe through the pages of the widget area on the left, which can be filled with any kind of information, thanks to the variety of the available widgets.
Page 31
This permits to highly customize the DIVUS LAUNCHER in a very easy way. At delivery, DIVUS TZ already contains a set of background pictures, which can be freely used. The background feature works for both the traditional and the extended design.
Page 32
When using maximum configuration (5 pages), it will be possible to connect 30 apps to the DIVUS LAUNCHER. If only 1 page is selected, the launcher becomes a static page and the swipe gesture to change between pages will be disabled.
Page 33
(see explanation above). The next section deals with the display and energy management of DIVUS TZ as well as with the configuration of the lock screen.
Page 34
(used for the display dim and off functions) also permits to manually change the brightness of the display of DIVUS TZ. Furthermore the default background picture of the Android system can be adapted, which is shown for example in the RECENTS menu or in apps which do not occupy the full screen size (like e.g.
Page 35
DIVUS TOUCHZONE . The option Turn off will disable display and touchscreen after a certain time. In order to re-enable DIVUS TZ from this state, the HOME button must be pressed; no touch input will be recognized in this state.
Page 36
DIVUS TOUCHZONE . The checkbox permits to enable / disable the control. The 3 dimming steps permit to create different time scheduling. Each dimming step works in the same way; if the instant of time configured on the left is reached, the brightness will be set to the value of the corresponding slider.
Page 37
DIVUS TOUCHZONE . The web template offers its functionality through a special HTML page which is directly obtained from the connected KNXCONTROL device. This means that the contents will always be shown in the typical OPTIMA design and the same page / functions will be available also directly within the OPTIMA interface.
Page 38
Furthermore, in front of graphical changes to the visualisation (like e.g. a THEME switch) it will be necessary to reboot DIVUS TZ through the power off menu in order to take over all the changes. The configuration of the native template is very similar to the one of the web template, but it offers a dedicated sub-menu for the configuration of the template design.
Page 39
If this effect is enabled, the switching function will not only result in the corresponding KNX action, but also the display of DIVUS TZ will be dimmed accordingly for a moment (switch OFF = display dimmed, switch ON = display brightens).
Page 40
OPTIMA interface. The GPIO (general-purpose-input-output) is an additional lock screen, with which the digital output of the DIVUS TOUCHZONE can be controlled. It is nearly identical to the native KNX lock screen in both function and appearance, it only has an additional setting to select which output should be controlled.
Page 41
DIVUS LAUNCHER once DIVUS TZ has completed the boot, after a 10s delay. This allows showing a specific app whenever the device makes a reboot. A click on the HOME button or HOME key will always lead back to the DIVUS...
Page 42
Terminated apps may still show up in the recents tab of the navigation bar, though they are actually stopped. This function is also only available on the new series of DIVUS TZ. ATTENTION! Terminating an app may leave the app in an unstable state and on the next start the app may behave faulty.
Page 43
These options are usually only used/changed if instructed to do so by DIVUS employees. There is also a possibility to manually send the logs to DIVUS or to empty the log file. Additionally the logs can also be send automatically, if needed by DIVUS for long-term monitoring.
Page 44
/ unmount microSD cards connected to the corresponding slot on the front side of DIVUS TZ. The menu permits to mount, unmount and also erase the storage card. Furthermore this menu also shows information about the integrated storages. At remaining space is used by the Android installation itself.
DIVUS TOUCHZONE . DIVUS OPTIMA The app DIVUS OPTIMA was especially designed to work in combination with DIVUS KNXCONTROL. The app can be classified as web app, which shows contents that normally can also be shown through a common browser, in an optimized way.
Page 46
DIVUS TOUCHZONE . already described for the DIVUS LAUNCHER the correct password must be inserted. The following screenshots show as well the password dialog as also the settings page: The following list explains the single parameters that can be configured:...
Page 47
NOTE: Since the switching between local and remote access is not required when using the app on DIVUS TZ (it will always run in the local network), the corresponding option will be shown only when using the app on mobile devices.
Page 48
Additionally to the app itself, also a dedicated widget for DIVUS OPTIMA exists. The widget can be created multiple times and each widget can be used to control an object inside KNXCONTROL. To use the widget, the user has to select it from the list of available widgets and configure it accordingly.
Page 49
Further, at the moment the widget works only locally, remote control is currently not supported. Further information about the DIVUS OPTIMA app can be requested by contacting the technical support of DIVUS.
DIVUS TZs. NOTE: This app is no longer actively supported and is replaced by the improved DIVUS VIDEOPHONE 4. Users who wish to keep this app can nevertheless continue using it. The manual for DIVUS VIDEOPHONE can be found on...
DIVUS VIDEOPHONE 4 A new and improved intercom app is available: DIVUS VIDEOPHONE 4. This new version offers a vast set of useful functions, more customization and improved overall stability. Just like the other DIVUS apps, also this app is preinstalled on all DIVUS TZs.
DIVUS homepage: As opposed to the DIVUS OPTIMA app, DIVUS KIBRO has no menu bars and uses the full display area for showing its contents. Since the Android navigation bar on the bottom can also be hidden through the launcher app settings, it is also possible to use the total area of the display.
Page 53
URL. Empty Cache If this menu entry is clicked, the local cache of DIVUS TZ is emptied / deleted and at the next connection to the server all data is downloaded again. This function is necessary whenever changes are made on the server side or if e.g. the URL has been changed completely.
Page 54
The compatibility with any type of web contents corresponds at most to the one of the default Android 4.2.2 web browser. Further information about the DIVUS KIBRO app can be requested by contacting the technical support of DIVUS.
This app aims at help you organize and remind you of disposing your household waste and garbage, letting you focus on more important things. DIVUS MÜLLPLANER offers a calendar to have an overview over past and coming garbage pickups and by a simple click on a day you can remove existing pickups and easily add new coloured pickups with predefined intervals.
Page 56
DIVUS TOUCHZONE . Before going into the details of the calendar and how to manage picku settings. Opening the settings will show the following screen. In the first drop-down menu you can select which standard holidays you want to display in the calendar.
Page 57
DIVUS TOUCHZONE . NOTE: If you happen to delete any holidays by mistake, you can retrieve them by switching the holidays to selected region will be removed and the new ones added (again), holidays that have been added manually persist.
Page 58
. Here you can either delete the pickup for this given day only, or delete from the calendar every pickup with this type of trashcan. Further information about the DIVUS MÜLLPLANER app can be requested by contacting the technical support of DIVUS.
You can view up to 6 cameras simultaneously and by a simple click quickly see one in full screen. With the new app DIVUS IP CAM VIEWER you can get the most out of your IP cameras and increase your surveillance capabilities;...
Page 60
DIVUS TOUCHZONE . With the top- -output actions directly through the app. Clicking on it will open a new dialog to select an action to execute, as visible in the next screenshot. NOTE: If the actions are not configured, the key will not be visible. As soon as at least one action is configured, the key icon will be visible.
Page 61
DIVUS TOUCHZONE . clicking on the bottom right trash button the currently displayed screenshot can be deleted. With a horizontal swipe on the screenshot you can go to the next/previous screenshot. The following screenshot shows the available settings of the app.
Page 62
DIVUS TOUCHZONE . By default, every action is disabled and has to be activated manually before it can be used/configured. Disabled actions will not show up in the dialog to select the action to execute, even though fully configured. Enabling an action will also enable to configure it. For every action, you can select an icon from a given set, the name for the action and the duration in milliseconds.
Page 63
DIVUS TOUCHZONE . For an empty camera the form looks as follows: Camera name Here an optional name for the camera can be added. This name will be displayed both in the camera list as well in the camera frame in the main view.
Page 64
When enabled, uses HTTPS-prefix for JPEG and MJPEG, and RTSPS-prefix for RTSP/H264. ATTENTION! RTSP is currently disabled and will be available later on. Further information about the DIVUS IP CAM VIEWER app can be requested by contacting the technical support of DIVUS.
While the app is running, the glass front of DIVUS TZ can be cleaned without the risk of unwanted operation. Once the countdown reaches 0, the app will be closed automatically and the touch input is re-enabled.
ATTENTION! When starting QuickSupport a disclaimer is shown, this disclaimer has to be accepted in order to start the app. Read it carefully! If the reported ID is passed to the DIVUS personnel, a remote connection can be initiated and an efficient support can be given.
3.13 SYSTEM UPDATE In order to either update DIVUS TOUCHZONE to the latest version or to reset it to factory defaults, clearing all kind of user data (like settings, installed apps, Google accounts etc.), you can use the pre- After starting this app, you can either update your DIVUS TOUCHZONE using a special file or you can reset the device to factory settings.
WI-FI SUPPORT As with the previous image, also Android 5.0.2 can connect to Wi-Fi through the additional use of a DIVUS Wi-Fi dongle. This dongle is not included in the product contents and has to be acquired separately. The Wi-Fi settings can be accessed by swiping the status bar all the way down from the top margin of the screen and then clicking menu you can enable/disable Wi-Fi, scan for networks and connect to them.
FUTURE UPDATES OF ANDROID 5.0.2 Updating a DIVUS TOUCHZONE running Android 5.0.2 with future image updates will be possible with the pre- installed SystemUpdate App. As it was possible up to now, with this app you can update the device through SD- card or USB- le, or reset it to factory settings.
80 mm 80 mm For the cutout see the wall mount box. Fixing elements: DIVUS TOUCHZONE has to be fixed to the wall mount box using the furnished screws / magnets. Mechanical characteristics: Front face: Alloy anodized PC Unit: Alloy anodized & plastic...
DIVUS TOUCHZONE . MAINTENANCE AND UPKEEP DIVUS TOUCHZONE is a completely fanless system thus strongly reducing the necessary maintenance expenses. NOTE: Additional information about the components which are used in DIVUS TOUCHZONE may be found in the original documentation of the manufacturer.
DIVUS TOUCHZONE . Appendix RECYCLING INFORMATION English Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems) Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
Page 79
DIVUS TOUCHZONE . Français applicable dans les pays de Les produits sur lesquels le pictogramme (poubelle barrée) est appose ne peuvent pas être éliminés comme ordures ménagères. Les anciens équipements électriques et électroniques doivent être recyclés sur des sites capables de triller ces produits et leurs déchets. Contactez vos autorités locales pour connaitre le site de recy- server les ressources et à...