Table of Contents
Advertisement
19. PIN (Pin cushion) button
ThiS button is used to switch to dynamic convergence adjustment mode for adjusting
the pin cushion distortion of the red (R), green (G) and blue (8) picture segments.
.
Setting
is
possible once the TEST button has been pressed so that a test
pattern
is
displayed on the screen.
.
When adjusting the green
(G)
size. all three colors will be adjusted at the same time.
Button operation procedure
LB
Dr
~
(After 1-2 seconds)
NOTE:
.
In addition to using the above method, the pin cushion distortion
settings
can also be saved
by pressing
the
STORE
button
twice
to store the changes
after each
color has been
adjusted.
.
If you would
like to clear
the adjustment settings,
turn off the power for the projector without pressing the
8~
ICQlTGASTI
e
c:>
adjustment mode
Red pin cushion distortion
0
Advertisement
Table of Contents
