':4; Adjusting the zone
convergence
.
This
adjustment should be carried out if localized color misalignments occur which cannot be corrected by
means of dynamic convergence adjustment or centering adjustment.
. Use the button operations which are given in the table below to adjust the zone convergence.
I
After setting-up and adjustment haS been completed. carry
out tne fOllowmg steps DeTore retUrning
tne
remote control
to the customer.
(1) Move the control
pattern
switch of the remote control to the normal position.
(2) Move the function
selection switch inside the battery compartment
to the OFF position.
Once these steps have
been carried
out,
the remote control
cannot be used to change the setting-up
...n., ,.,.'m"nl.,.
If tho"
.,,~'" nnt nnn",
tho "",.,.tnm",~
minht
,::,,'v.;rI~,.,thl ",It",r th", <:>rii..ctm"".,t
c",ttinnc:.
~
63
~