Table of Contents
Advertisement
PT-M1085U1PT-M1083U I
@ Adjusting the red and blue dynamic convergence
. Carry out these adjustments after green dynamic convergence adjustment and centering convergence
adjustment have been completed.
. Use the button operations which are given in the table below to adjust the red and blue dynamic convergence.
(If any adjustments are not necessary, they may be omitted
from the adjustment procedure.)
(1) Adjusting the red dynamic convergence
(2) Adjusting the blue dynamic convergence
.
The procedure for adjusting the blue dynamic convergence is the same as that for the fed dynamic
convergence
given above. However, in step (1), press the 8 button to adjust blue (8) to match green (G) (8-G),
and to adjust blue (8) to match green (G) and red (R) (8-G-R).
NOTE:
. You can use either of the
following
two methods to register changed
settings
in memory by pressing the STr
button.
(1) Pressing the STORE button
twice
after
each
adjustment mode setting has been completed
(2) Pressing the STORE button twice after all adjustments from 1 to 7
have
been completed
~
62 -
~
.'
Advertisement
Table of Contents
