Table of Contents
Advertisement
Connecting to a S-VIDEO signal source
Projector terminal
IN
NI 0=1011\0£
This
is used to screw and lock
onto the
S.vIDEO terminal
on the
projector.
These
converSion adapters make it possible to
increase
the distance between the S-VIDEO
terminal connections using BNC cables.
Points to note:
1. The cables
used should be of the
same
length.
and this length should not
exceed
328 feet
(100 m). Exceeding this length will have an
adverse effect on Y/C signal transmission.
2. The connectors are color keyed; the Y signal
connector IS red and the C signal connector IS
black.
~
VCR with S-VIDEO
terminal
If the S-VIDEO output terminal on the VCR is a
screw-type terminal. the adapter should be
attached before connecting the cable to the
terminal.
Care
should be exercised to ensure proper
"red" to "red" and "black" to "black" cable
connection.
To prevent connector damage or loss, do not pi ace too
much strain on the S-VIDEO connectors once they are
connected.
3.
IN/OUT
4
-
3
1
.:0:
2 Pin No.
~ ~ ~
Advertisement
Table of Contents
