Offset; Function On/Off - Stanford Research Systems DS360 Operating Manual And Programming Reference

3-8 Operation
# The rms, dBm and dBV values for White & Pink Noise are based on the total power in the output
bandwidth (200 kHz) at a given peak-to-peak setting.

Offset

Press the [OFFST] key to display the DC offset. The DC offset range is limited by the
amplitude, since
|V
AC PEAK
The offset has three digits of resolution, however the smallest increment is determined
by the sum of the peak AC amplitude and the DC offset. The tables below show the
offset range and resolution for given amplitude settings. Offset is not active for balanced
outputs and is the same polarity for both unbalanced outputs (a +2 V
the positive and negative offsets to +2 V) for unbalanced outputs.
12.60 mV to 125.9 mV
126.0 mV to 1.259 V
6.320 mV to 63.19 mV
63.2 mV to 0.6319 V
|V
AC PEAK
6.320 mV to 63.19 mV
63.20 mV to 0.6319 V
To set a new offset, type the desired value on the keypad, followed by the [V
use the spin knob to modify the currently displayed offset value.
Function On / Off
The output may be switched on or off by pressing the [ON/OFF] key. The output status
is indicated on the main display under the OUTPUT heading. When the output is off, the
output connectors are terminated into the select source impedance.
DS360 Ultra Low Distortion Function Generator
| ≤ 20 V
| + |V
DC
Unbalanced Hi-Z
|V | + |V |
AC PEAK DC
0 to 12.59 mV
1.260 V to 20.00 V
Unbalanced 50 Ω Ω Ω Ω
|V | + |V |
AC PEAK DC
0 to 6.319 mV
0.6320 V to 7.200 V
Unbalanced 600 Ω Ω Ω Ω
| + |V |
DC
0 to 6.319 mV
0.6320 V to 10.00 V
| ≤ (200 * V
|V
offset AC PEAK
Offset Resolution (V
10 µV
100 µV
1 mV
10 mV
Offset Resolution (V
10 µV
100 µV
1 mV
10 mV
Offset Resolution (V
10 µV
100 µV
1 mV
10 mV
).
offset sets both
DC
)
DC
)
DC
)
DC
] key. Or
DC