Figure 2-5 Indicators - Stanford Research Systems DS360 Operating Manual And Programming Reference

Indicators
STATUS
REM SRQ
ACT ERR
Status LEDs
These 4 LEDs indicate the DS360's status.
Name
REM
The DS360 is in GPIB remote status. The [>] cursor right key returns local control.
SRQ
The DS360 has requested service on the GPIB.
ACT Flashes for RS232 or GPIB activity.
ERR
Flashes on error in a command.
Configuration LEDs
These LEDs indicate the output configuration, source impedance and triggering mode of
the DS360.
Heading
OUTPUT
IMPEDANCE
TRIGGER
OUTPUT IMPEDANCE
ON 50
OFF 150
600
TRIG'D HI Z
Figure 2-5 Indicator LED's
Status LEDs
Configuration LEDs
Display LED
ON
OFF
TRIG' D
50
150
600
Hi-Z
INT
EXT
SINGLE
GATE
DS360 Ultra Low Distortion Function Generator
TRIGGER
INT FREQ
EXT STR/C
SINGLE TONE1
COUNT
GATE
Function
Parameter
Output On
Output Off
Sweep or Burst Triggered
50 Ω Output Impedance
150 Ω Output Impedance
600 Ω Output Impedance
Hi-Z Output Impedance
Internal Trigger for Sweeps or bursts
External Trigger for Sweeps or Bursts
Single Trigger for Sweeps or Bursts
External Gate for Bursts only
Basics 2-9
AMPL OFFSET
STP/BW REL
TONE 2 DEPTH
TRIGR RATE