Figure 2-6 Display - Stanford Research Systems DS360 Operating Manual And Programming Reference

Display
Parameter Display
This 8 digit display shows the value of the currently displayed parameter. Error, status
messages and configuration information may also appear on the display.
Units LEDs
These LEDs indicate the units of the displayed value. If no LED is lit the number
displayed has no units or is seconds (for noise bursts).
Display LED
Hz
dB
V
kHz
dBV
V
%
dBm
Vrms
Units LEDs
Meaning
Hertz
dB relative to preset value
Volts Peak-to-Peak
P-P
Kilohertz
dB relative to 1 V
Volts DC
DC
% (used with BURST DEPTH)
dB relative to 1mW into selected source impedance
V
RMS

Figure 2-6 Display

into selected source impedance
RMS
DS360 Ultra Low Distortion Function Generator
Basics 2-11
Hz dB Vp-p
kHz dBV VDC
% dBm Vrms