Swing Setting - Gree XK41 Owner's Manual

3.6 Swing Setting

Swing On: Press Function under on state of the unit to activate the swing function. In this case,
will blink. After that, press Enter/Cancel to make a confirmation.
Swing Off: When the Swing function is on, press Function to enter the Swing setting
interface,with blinking. After that, press Enter/Cancel to cancel this function. Swing setting is
shown as Fig.3.6.1.
Notes:
S leep, Turbo or Blow setting is the same as the Swing setting.
① .
A fter the setting has been done, it has to press the key "Enter/Cancel" to back to the setting
② .
status or quit automatically five seconds later.
Fig.3.6.1 Swing Setting
7
Wired Controller XK41 & XK47