Step 15. Connect The Keyboard And Mouse (When Using A Graphics Display) - IBM pseries 630 6C4 Installation Manual

Step 15. Connect the Keyboard and Mouse (When Using a Graphics Display)

Note: Before doing this step, read and understand "Step 3. Read the Safety Notices"
If a wrist/palm rest was included with your keyboard and you want to attach it, refer to
the keyboard documentation for installation instructions.
As shown in the following illustration, connect the keyboard and mouse to the
connectors on the rear of the system unit.
Eserver pSeries 630 Model 6C4 and Model 6E4 Installation Guide
30
on page 10.