Security Features; Resetting The Mouse And Keyboard - IBM Cluster 1350 Installation And Service

ATTENTION!
The servers and the console are listed in order by port or by name, depending on the user-definable settings in
OSCAR menu attributes.
2. To select a node or the console, do one of the following:
3. Press Escape to exit OSCAR and to remove the OSCAR selection window from

Security features

The KVM Switch provides for system security through the OSCAR interface. This
security provides a simple keyboard and screen lock.
The security screen is displayed by selecting Advanced Menus
You must always provide a password to access the fields on the screen. The default
password is oscar.
You can change passwords, set wait-time for locking to take effect, and set
low-power mode for monitors so configured.

Resetting the mouse and keyboard

If the mouse and keyboard are not working properly (for example, no cursor
response), you may need to reset the mouse and keyboard to restore the correct
settings for the selected node. Perform the following steps to reset the mouse and
keyboard:
1. Press Print Screen. The OSCAR selection window appears on the display.
2. Press F2. The Advanced menu window appears. The highlight is in the
3. Using the Up and Down arrow keys, move the highlight to Reset, and press
If the mouse or keyboard are still locked up, you can push the reset button on the
back panel to reset the KVM Switch. Pressing the reset button may allow you to
recover the device settings without power cycling the node.
88
Installation and Service
a. Using the Up and Down arrow keys to select the node or the console; then
press Enter.
b. Press the numeric key that corresponds to the node's port number or the
console's port number, then press Enter.
c. Use the mouse to double click on the node or the console you want to
select.
the display. The status flag window returns to the display to indicate the
currently connected node or the console.
Commands menu.
Enter. The mouse and keyboard are now reset.
Setup Security.