Table of Contents
Advertisement
Enter the delayed start time by the minute; the sensor operation in Secure mode
must have been specifi ed in advance. (Refer to "Alarm Operation Time for
Auxiliary Input" on pages 30-31)
5
To specify the operation time of the door contact
sensor
The Door Contact sensor detects the opening of the door.
If the door is forcibly opened by an unregistered user, the Door Contact Sensor will perform
the predefi ned alarm operation after the set time. (For setting the alarm operation time,
refer to
4 To specify the alarm output for an input error of the door contact
1. Present the Master Card to the device.
2. Press Button
3. Enter the two-digit operation time (unit: second) and press
• The default is set to "00" second, which means the Door Contact Sensor is disabled.
• You can specify from 01 to 99.
6
To specify the limited time for the keypad input
When it passes a certain time during your setting using the keypad , all your settings will be
ignored and return to the initial state.
Specify the delay time between the input of the last key and restoring the previous state.
1. Present the Master Card to the device.
your motion will be detected before you can get out of the secure area,
which will trigger the alarm. Thus, it is recommended to set the Secure
mode to get activated after a certain time.
and Button
in sequence and press
.
p.26
100RV
sensor.)
.
Basic setup
Hide quick links:
Advertisement
Table of Contents
