Exit Button Connection; Door Contact Sensor Connection; Auxiliary Input Device Connection (Aux 1 (Green), Aux 2 (Green With White Stripes), Aux 3 (Green With Red Stripes); Output Connection - IDTECK 100RV User Manual

1. Connect the DC 12V(+) of the power supply unit to the red line.
2. Connect the GND(-) of the power supply unit to the black line.

Exit Button Connection

1. Connect one line of the Exit button to the orange line.
2. Connect the other line of the Exit button to GND.

Door Contact Sensor Connection

1. Connect one line of the door contact sensor to the yellow with red stripes.
2. Connect the other line of the door contact sensor to GND.
Auxiliary Input Device Connection (AUX 1 (green), AUX 2 (green with white
stripes), AUX 3 (green with red stripes)
1. Connect one line of the external input device to AUX 1, AUX 2, or AUX 3.
2. Connect the other line of the external input device to GND(-).
3.2

Output Connection

Figure 3-2 100RV_outputconnection
Installation and external connection p.11
100RV