IDTECK 100RV User Manual page 58

Problem
Troubleshooting
Action
I. If you have to use a measuring device such as an
oscilloscope or a multimeter, please consult with a
qualified technician.
II. Remove the door lock from 100RV, and check the
relay output of 100RV:
Replace the door lock if the relay output of 100RV
shows a normal state.
III. For more information, refer to the door lock
connection section in the user manual.
3. If the problem persists after you have followed the
procedures above, contact a designated service center.
p.53
100RV