User Management; To Register Cards In Rf Only Mode; Registering Cards In A Combination Of Rf And P/W Modes - IDTECK 100RV User Manual

User management

1

To register cards in RF only mode

Ensure that you must have registered the Master Card and the device is specifi ed in RF
ONLY mode.
1. Present the Master Card to the device.
When the mode is specified, only the green LED indicator flashes.
2. Press Button
When the device enters Standby, only the red LED indicator fl ashes.
3. Present a card to the device, it will be registered with a beep.
Repeat this step if you want to register multiple cards.
4. Present the Master card to the device again, and the device will switch to normal
mode. If no input is made for 20 seconds, the device will switch to normal mode.
2 Registering cards in a combination of RF and P/W
modes
Ensure that you must have registered the Master Card and the device is specifi ed in RF +
P/W mode.
1. Present the Master Card to the device.
When the mode is specifi ed, only the green LED indicator flashes.
2. Press Button
and Button in sequence and press
and Button in sequence and press
p.21
6
.
.