When the device enters Standby, only the red LED indicator flashes.
3. Present a card to the device, enter the 4-6 digit password and press
Repeat this step if you want to register multiple cards.
4. Present the Master card to the device again, and the device will switch to normal
mode.
If no input is made for 20 seconds, the device will switch to normal mode.
3
To register cards in PIN mode
Ensure that you must have registered the Master Card and the device is specifi ed in PIN
mode.
1. Enter the Master PIN number and press
When the mode is specified, only the green LED indicator flashes.
2. Press
When the mode is specified, only the green LED indicator flashes.
3. If you enter a user number (4-6 digits) to register and press
be registered with a beep.
Repeat this step if you want to register multiple PIN numbers.
4. Present the Master PIN number to the device again, and the device will switch to
normal mode.
If no input is made for 20 seconds, the device will switch to normal mode.
4
Registering cards in RF card / PIN combination mode
Ensure that you must have registered the Master Card and the device is specifi ed in RF Card
/ PIN combination mode.
1. Present the Master Card to the device.
Button and Button
.
in sequence and press
p.22
100RV
.
.
, the PIN number will
User management