Table of Contents
Advertisement
2. Press Button
3. Enter the two-digit operation time (unit: second) and press
• The default is set to "20" second.
• You can specify from 10 to 99.
7
To specify the alarm output port for the dismantled
device
Specify the alarm type for the dismantled device. The alarm rings from the dismantlement of
the device to the authentication of the Master Card or a registered card.
1. Present the Master Card to the device.
2. Press Button
3. Provide the alarm output port and press
• The default is set to "02" (alarm).
For the alarm output port settings, refer to
• The alarm for the dismantled device occurs regardless of the operation mode of
either Normal or Secure so you simply specify the operation port only. (To specify the
operation port, refer to
8
To open or close the entry door
Follow the step below If you want to keep the door open regardless of the authentication
process using the Master Card or PIN.
1. Present the Master Card to the device.
2. Press Button
• To release opening the door, repeat Step 1 above, select the <
Basic setup
and Button
in sequence and press
and Button
in sequence and press
the operation port settings in the Output Port Setting
and Button
in sequence and press
.
.
.
Output port
table.
.
p.27
100RV
.
Table.)
> buttons and
Hide quick links:
Advertisement
Table of Contents
