Fronius IG 15 Operating Instructions Manual page 48

- To switch between displays
(D)
MAIN 1., PS
CTRL
3. - press key (A) or (B)
(C)
(A)
display
version number
(B)
(A) (B)
display
serial number
(C)
(A)
display
version number
(B)
(A) (B)
display
serial number
(C)
display
type number
(A)
(B)
display
version number
2. and ENS
01
(D)
(C)
2
(D)
(C)
(D)
(C)
40
- „Version" displays version num-
ber and serial number of the IG
control unit and the power stage
- enter „Version"by pressing key
„Enter"(D)
1. For displaying version number of
the IG control unit : press key
„Enter" (D)
- exit by pressing key „Esc" (C)
- to switch into display of serial
number for the IG control unit:
press keys" (A) or (B)"
- exit with key „Esc (C)"
2.To display version number of
power stage, press key „Enter
(D)" - exit with key „Esc (C)"
- to switch into display of serial
number of the power stage,
press keys „(A) or (B)" - exit with
key „Esc (C)"
3.To display type number of ENS:
press key „Enter" (D)
- exit with key „Esc" (C)
- to switch into display of version
number for ENS:
press keys (A) or (B)
- exit with key „Esc" (C)
Note! in case the FRONIUS
IG unit is not equipped with
the ENS option, type num-
ber and version number
cannot be displayed.
- after the „Enter" key (D) has
been pressed, the message
„N.A." is displayed on the screen
- exit by pressing key „Esc (C)"