Fronius IG 15 Operating Instructions Manual page 41

- To switch between settings
(D)
Auto 1., On 2. and Off 3.
- press keys (A) or (B):
(A)
(B)
(A)
(B)
Important! These instructions are only applicable for the display back-
ground illumination. It is not necessary to deactivate the display itself
because its energy consumption is less than one mW (1/1000 W).
(D)
1
(C) (D)
(C) (D)
(C) (D)
(C) (D)
(C) (D)
33
- „Light Mode" ... pre-setting of
display illumination
- to enter „Light Mode": press key
„Enter" (D)
1. The display illumination will stop
30 seconds after the last time a
key has been pressed
- accept: press key „Enter" (D)
- maintain previous setting: press
key „Esc" (C)
2. The display will remain perma-
nently illuminated for the duration
of the operation of power supply
into the mains
- accept: press key „Enter" (D)
- maintain previous setting: press
key „Esc" (C)
3. The display illumination will be
permanently off:
- accept: press key „Enter" (D)
- maintain previous setting: press
key „Esc" (C)
- „Cash" ... setting of currency
and rate for invoicing the energy
supplied
- enter „Cash" by pressing key
„Enter" (D)
2