Fronius IG 15 Operating Instructions Manual page 43

(D)
(A)
(D)
(A)
- accept the IG-No. selected: press key „Enter" (D)
- maintain previous setting: press key „Esc" (C)
Note! Allocate an own address to each FRONIUS IG when con-
necting several FRONIUS IG into a data communication network
using data recorders.
It is important to give each FRONIUS IG an own address, so that the data
recorder can differentiate between the individual static inverters. If two
FRONIUS IG are in the system with the same address, they cannot com-
municate with the data recorder. Set another address on the FRONIUS IG
showing the status-message 504.
(C) (D)
(B) (C) (D)
(B) (D)
35
- „IG-NR" ...Setting the number
(=address) of the FRONIUS IG
unit in a setup comprising more
than one photovoltaic inverter
linked with each other
- enter „IG-NR" by pressing the
key „Enter" (D)
enter address (01 ... 99)
(factory setting: 01)
- first digit starts flashing
- select a figure for the first digit by
pressing key (A) or (B)
- confirm with key „Enter" (D)
- subsequent digit starts flashing
- for second digit follow procedure
as described above for first digit