Fronius IG 15 Operating Instructions Manual page 44

(C)
(D)
(A) (B)
If a successful data link has been
(B)
set up then „OK
- Press key (B) to call up the Sig-
nal Card test
(D)
- Start the Signal Card test by
pressing the „Enter" key (D)
Signal Card active
- The Signal Card's acoustic signal sounds for confirmation.
Important! Check the signal lines if the signal fails to sound.
(D)
" is displayed.
COM
(D)
(C)
36
(A) (B)
„Error" is displayed if DatCom is
not installed or the data link is
not functioning correctly.
Signal Card not installed
(C)