Figure 6-45 Decoder Configuration - Date/Time; Figure 6-46 Decoder Configuration - Osd - Honeywell HUSS-E1 Manual

HUSS-M Video Client
Date/Time
Date/Time tab configures decoder's date and time information.
Configuration procedure is the same as that of encoder. Refer to
Date/Time on page 72 to configure it.
Figure 6-45 Decoder Configuration – Date/Time
OSD (On Screen Display)
Click Osd tab. The page below is displayed. Select Enable check
box. Then encoder's alarm information (external alarm, detected
motion and USB savage) will be displayed on screen along with the
decoded video.

Figure 6-46 Decoder Configuration - OSD

78