Figure 4-23 Loopback Setting; Figure 4-24 Firmware Update - Honeywell HUSS-E1 Manual

If loopback function is enabled, the 75Ω resistance
should be matched with external devices, otherwise
Note
remote decoded video will be over-bright and result in
brightness saturation.

Figure 4-23 Loopback Setting

Firmware Update
Video Encoder supports Firmware Update through network.

Figure 4-24 Firmware Update

Click Browse button to select the firmware files to be updated. Then
click Upload button to upload it to encoder.
When the uploading operation is finished, the video encoder will
automatically install the firmware and then reboot.
Honeywell
37