Basic; Figure 4-8 Network - Honeywell HUSS-E1 Manual

•
Network status: Display MAC address, IP address, Subnet
Mask, Gateway of the encoder being configured. IP address,
Subnet Mask and Gateway can be configured on Basic section.
•
Version info: Display firmware version and build date.
•
Log: Display all the configuration modifications as well as the
alarm records. It can record up to 1024 Log messages.

Basic

Basic configuration contains: Network, Video, Audio, Date/Time,
OSD and System Config.
Network
There are two network connecting methods: Static IP and DHCP.

Figure 4-8 Network

Static IP: Enter IP address, Subnet Mask, Gateway manually to
select the right encoder. When the IP address is changed, the
system will locate to new encoders corresponding to the new IP
address automatically.
DHCP: Click the radio button of Connection Method: DHCP and
click OK, the system will assign a new IP address to the encoder
automatically.
Honeywell
25