User Management; Figure 6-47 Decoder Configuration - Alarm Out - Honeywell HUSS-E1 Manual

Honeywell
Alarm Out
Alarm information can be output in Manual Mode or Interlock Mode.
Manual Mode: Select the Enable check box, decoder will output
alarm information. Otherwise, decoder won't output alarm information.
Interlock Mode: Select the Interlock Mode (At Encoder) radio button,
alarm out of the decoder is linked to the alarm input, motion detection
and USB storage events occurred in the video encoder. If this
performance is enabled, the decoder will output alarm signal when
any one of the three events mentioned above is detected by the
encoder.
Figure 6-47 Decoder Configuration – Alarm Out

User Management

Click User Management in the Settings panel, Figure 6-48 is
displayed. Click proper buttons to manage users of HUSS-M client,
such as adding new users, deleting existing users and so on.
79