Figure 6-20 Decoder Set - Honeywell HUSS-E1 Manual

HUSS-M Video Client
The windows bound to HUSS-D1 decoders can be laid out exactly
according to the real monitor wall . Dragging HUSS-E1 encoder from
the list to the window will connect the corresponding decoder to the
encoder. In this way, video displayed on each window in HUSS-M
corresponds to that displayed on the monitor in the monitor wall.
Adding new Decoder
Click Tool Decoder Set in menu bar and

Figure 6-20 Decoder Set

Click Add and Figure 6-6
configuration on page
Click Tool Matrix Set in menu bar and
Choose a matrix mode in the drop-down list. You can also customize
matrix mode by performing the following steps.
Click Add in Figure
64
is displayed. Refer to
55 to add a new decoder.
6-21. Figure 6-22
Figure 6-20
Figure 6-6
Figure 6-21
is displayed.
is displayed.
and its
is displayed.