Figure 5-3 Network - Honeywell HUSS-E1 Manual

Honeywell

Figure 5-3 Network

Static IP: Enter IP address, Subnet Mask, Gateway manually to
select the right decoder. When the IP address is changed, the
system will locate to new decoders corresponding to the new IP
address automatically.
DHCP: Click the radio button of "Connection Method: DHCP", the
system will assign a new IP address to the decoder automatically.
Video Settings
Click Video tab on the left of the web page. Figure 5-4 (Video
settings) is displayed. Video Settings option enables you to operate
the encoders displayed in the list of Figure 5-4. Encoders' name, IP
address and status are displayed in the list. Click the buttons below
the list to operate the selected encoder.
41