Sharing Content - Cisco Service Manual Service Manual

Cisco TelePresence SX20 Quick Set
Contents

Sharing content

You can connect a presentation source to one of the external
inputs of your video system. Most often a PC is used as
presentation source, but other options may be available
depending on your system setup.
While in a call you can share content with the far end, that is
the other participant(s) in the call.
If you are not in a call, the content is shared locally on your
display.
D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013.
Introduction Web interface Web interface
Navigate to: Call Control > Call Control
System settings
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
16
Administrator Guide
Setting passwords Appendices
Sharing content
1. Choose a Presentation source from the
drop-down list.
2. Click Start Presentation.
Stop content sharing:
Click the Stop Presentation button that becomes
visible while sharing.